BNKYT - TAMOL 850 DISPERSING AGENT, 60230

  • MSDS: BNKYT
  • Manufacturer: ROHM AND HAAS CO
  • Product Name: TAMOL 850 DISPERSING AGENT, 60230
  • National Stock Number: 6850-00N026500
Product Identification

Product ID:TAMOL 850 DISPERSING AGENT, 60230
MSDS Date:04/26/1988
FSC:6850
NIIN:00N026500
MSDS Number: BNKYT

Responsible Party
ROHM AND HAAS CO
INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19105
US

Emergency Phone: 215-592-3000;800-424-9300(CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

Contractor
ROHM AND HAAS CO
PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

Ingredients

SODIUM SALT OF POLYMERIC CARBOXYLIC ACID

Fraction By Weight: 29-31%


RESIDUAL MONOMER; (INDIVIDUAL RESIDUAL MONOMER)

Fraction By Weight: < 0.1%


FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: 0.05%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 69-71%

Hazards

LD50 LC50 Mixture:LD50: (ORAL,RAT) > 5.0 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHAL: VAP/MISTS CAN IRRITATE NOSE &
THROAT. SKIN: IRRIT TO SKIN UPON RPTD/PRLNGD CNTCT. EYE: SLIGHTLY
IRRIT TO EYES. FORMALDEHYDE IS AN ANIMAL CARCINOGEN;HOWEVER,
OBJECTIVE DATA INDICATE THAT UNDER T YPICAL CONDITIONS OF USE FOR
THIS PRODUCT, THE TWA OF 0.5 PPM WILL NOT BE EXCEEDED. (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:FORMALDEHYDE: GROUP 2A (IARC); GROUP 2
(NTP); OSHA REGULATED.
Effects of Overexposure:HLTH HAZ: MOMOMER VAP CAN BE EVOLVED WHEN PROD
IS HEATED DURING PROCESSING OPERATIONS. IN SUCH A CASE, USE LOC
EXHST VENT WITH A MINIMUM CAPTURE VELOCITY OF 100 FT/MIN AT POINT
OF MONOMER EVOLUTION. R EFER TO INDUSTRIAL VENTILATION: A MANUAL OF
RECOMMENDED PRACTICE PUBLISHED BY ACGIH
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: MOVE SUBJECT TO FRESH AIR. EYE: FLUSH EYES WITH A
LARGE AMOUNT OF WATER FOR AT LEAST 15 MIN. GET PROMPT MEDICAL
ATTENTION. WASH SKIN THOROUGHLY WITH SOAP AND WATER. REMOVE AND
WASH CLOTHING BEF ORE REUSE. INGEST: IF SWALLOWED DILUTE BY GIVING
2 GLASSES OF WATER TO DRINK. SEE A PHYSICIAN. NEVER GIVE ANYTHING
BY MOUTH TO AN UNCONSCIOUS PERSON.

Fire Fighting

Flash Point:NON-COMBUSTIBLE
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 100C.
POLYMERIC SUBSTANCES ARE CAPABLE OF BURNING.

Accidental Release

Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY;
USE CARE TO AVOID FALLING. DIKE AND CONTAIN SPILL WITH INERT
MATERIAL. TRANSFER LIQUID TO CNTNRS FOR DISP. KEEP SPILLS AND
CLEANING RUNOFFS OUT OF MUNICIPA L SEWERS AND OPEN BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORAGE TEMP: 1C-49C. KEEP FROM
FREEZING--PRODUCT MAY COAGULATE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:WEAR SUITABLE NIOSH/MSHA APPROVED RESPIRATOR
WHERE EXPOSURE LIMITIS ARE EXCEEDED.
Ventilation:MECHANICAL LOCAL EXHAUST AT POINT OF CONTAMINANT (VAPOR,
MIST OR DUST) RELEASE.
Protective Gloves:IMPERVIOUS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 9.0-10.5

Chemical Properties

HCC:B3
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17 @ 20C
Vapor Density:< 1
Spec Gravity:1.0-1.2
pH:SUPDAT
Evaporation Rate & Reference:< 1 (BUTYL ACETATE=1)
Solubility in Water:DILUTABLE
Appearance and Odor:CLEAR TO PALE YELLOW LIQUID
Percent Volatiles by Volume:69-71

Stability

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:ONSET OF DECOMPOSITION IS 177C.
Hazardous Decomposition Products:NONE KNOWN.

Disposal

Waste Disposal Methods:INCINERATE THE CONTAMINATED DIKING MATERIAL AT A
PERMITTED FACILITY ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.